1969 Firebird "Routy" Project Updates V8TV

Our 1969 Pontiac Firebird project "Routy" is going through the early phases of its transformation, with many small detail items being checked off the list as we go. In this installment, we fix rusty bodymounts and straighten some slightly damaged supports on the subframe. Then we're repairing rust holes in the radiator core support, inner fenders, and small holes in the body. We uncovered a patch in the fender we didn't like, so we replaced it with new steel using some cool butt-welding panel clamps from Eastwood. A quick spray with Standox SprayMAX 2K Epoxy Primer keeps the part protected until the bodywork phase. This stuff is cool.. it's a Standox 2k epoxy primer in an aerosol can. That means it's got a primer and a catalyst in one container... you break the seal on the can, and the two components mix inside the can. You have to spray it out within about 1 week or it will harden in the can. It's really tough stuff that sprays great over little repair areas like this where you don't want to mix

Category:

Tags: Global, 1969, pontiac